Reliable, Affordable & Efficient Procurement

Call us now toll free:

(888) 340-3738

More Views



Quick Overview

SummitUSB31 is a thirty-one target, stand-alone duplication system. The tower copies portable USB storage drives and external USB Hard Drives without the use of a computer.

SKU: SummitUSB1-31

Availability: In stock

The SummitUSB series USB Duplicator is a reliable and affordable stand-alone system that copies portable USB storage drives and external USB Hard Drives without the use of a computer. Advanced asynchronous duplication means no waiting and no interruption because each channel can independently load, unload, and copy. The Summation USB Duplicators also feature user friendly 4-key control with LCD, high speed duplication and bit-by-bit “Compare” function to confirm successful duplication. Only carefully selected and tested components are integrated into this professional line of USB duplicators.
  • Built in ISO-9001 certified facility
  • High-speed up to 2GB/minute per port
  • User-friendly interface with real time information LCD display.
  • Complete standalone system, no computer required.
  • Supports all formats, data size and USB  memory card capacity bit for bit copy.
  • Complies with USA Department of Defense  (DoD) data security standard provides DoD Erase function.
  • "A2 Fake Picker" shows accurate capacity of USB/Memory card to get rid of low quality or fake flash media.
  • "Speed Check" shows Reading and Writing speed of the Flash module within 8 sec.
  • "H3/H5 Media Check" shows the quantity of bad block though bit for bit examination.
  • Quick data copy, copies only data contained    areas.(Supports FAT16/32, Linux ext2 / ext3, NTFS)
  • Supports Synchronous and Asynchronous modes for Copy/Compare/ Erase/ Format function.
  • Strict bit-by-bit hardware comparison further increases the reliability of duplication.
  • Firmware upgradable
  • Three Year Warranty
  • Operating Type: Standalone (No PC Required)
  • Targets: 7, 15, 23, or 31
  • Display: 2 x 16 Backlit
  • Supported Media: USB 1.0/2.0/3.0 USB-HDD 2.0/3.0
  • Transfer Speed: Up to 2 GB/min
  • Copy Mode: Synchronous or Asynchronous
  • System Memory: 128 MB
  • Power Supply: 115V - 230V
  • Operating Temperature: 41°F - 122°F
  • Operating Humidity: 15% - 90%

Dimensions & Weights (unboxed)

  • SummitUSB 1-to-7: 10"x 13"x 13", 8 lbs.
  • SummitUSB 1-to-15: 20"x 12"x 20", 10 lbs.
  • SummitUSB 1-to-23: 20"x 15"x 14", 12 lbs.
  • SummitUSB 1-to-31: 21"x 18"x 12", 14 lbs.

You may also be interested in the following product(s)